GX Series Hand Dryer
THE MOST COMPACT
HIGH SPEED ENERGY EFFICIENT
HAND DRYERS
GX Overview
THE GX SERIES AUTOMATIC HAND DRYERS PROVIDE A QUIET AND COMPACT DESIGN TO FIT ANY BUDGET.
Construction Features
SERIES COVER & FINISH - One-piece heavy duty, flame retardant ABS polymer with white finish. Optional one-piece 18 gauge steel cover finished with electrostatically applied, chip-resistant white epoxy finish (M), or chrome-plated satin finish (C). NEW Black Graphite Cover (BG).
TAMPER RESISTANT - Tamper resistant screws secure cover to base. Air intake vents are shielded for additional safety.
MOTOR - Permanently lubricated, maintenance-free, brushless induction motor with automatic resetting thermal protector. 1/12 HP, 3100 RPM.
AUTOMATIC SENSOR - RoHS compliant lead-free design. Microprocessor controlled infrared sensor turns dryer on when hands are under the outlet for up to 80 seconds.
HEATING ELEMENT - Constructed of NiChrome resistance wire with automatic resetting thermostat. Heating element operates in the black range for maximum life.
general Information
DRYER PLACEMENT
Dryers should be placed at least 2 feet apart and at least 12" from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18" above any projection which may interfere with the operation of the automatic sensor.
DRYER INSTALLATION
Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.
QUANTITY ESTIMATE, HAND DRYER:
Average traffic washroom ........... 1 dryer per 2 washbasins
Heavy traffic washroom .............. 1 dryer per washbasin
54" wash fountain ...................... 4 dryers per sink
download Literature
| Model Reference Chart | |||||||
|---|---|---|---|---|---|---|---|
| AUTOMATIC | ELECTRICAL RATINGS | ||||||
| ABS Steel |
Black Graphite |
Steel White | Steel Chrome | Volts | Amps | Watts | Hertz |
| GX1 | GX1-BG | GX1-M | GX1-C | 110-120 | 12 | 1500 | 50/60 |
| GX3 | GX3-BG | GX3-M | GX3-C | 208-240 | 6 | 1500 | 50/60 |
| Recessed Mounting is available by designating (R) after model no. or order kit separately. |
|||||||
| Specifications | |
|---|---|
| Air Flow | 130 CFM (Cubic Feet per Min.) |
| Air Velocity (Linear Ft Per Min.) |
4500 LFM (Linear Feet per Min.) |
| Air Temp | 130°F at 72°F Ambient |
| Sound Level | 63 dB (Quietest in its class) |
| Dimensions Surface | 10-1/8" W X 9-3/8" H X 5-5/8" D (25.7cm W X 23.8cm H X 14.3cm D) |
| Mounting Heights (From floor to bottom of hand dryer) |
Men 44" (112 cm) Women 42" (107 cm) Children 32"-42" (81-107 cm) Handicapped 36" (91 cm) |
| Warranty: 5 -year limited warranty GX-M/C. 3 -year limited warranty GX. Includes same day factory repair or part replacement. See owner’s manual for details. | |
how to Mounting Instructions
OUR PRODUCT LINE
 |
 |
 |
 |
|
|---|---|---|---|---|
| gXt Series | eXt Series | GX Series | DR Series | |
| Drying Time | 10 -12 Seconds | 12-15 seconds | 40 seconds | 30 seconds |
| Sound Level | 83 dB | 83 dB | 63 dB | 71 dB |
| Vandal Resistant | Yes | Yes | Yes | Yes |
| Warranty | 5 - Year Limited with same day factory service |
5 - Year Limited with same day factory service |
Up to 5 - Year Limited with same day factory service | 10 - Year Limited with same day factory service |
| Cover | White ABS Polymer, Black Graphite, or Steel | White ABS Polymer, Black Graphite, or Steel | White ABS Polymer, Black Graphite, or Steel | One Piece Steel 1/4” Cast Iron |
| Finish | White Epoxy or Chrome Plated | White Epoxy or Chrome Plated | White Epoxy or Chrome Plated | White or Stainless Steel White Porcelain Enamel |
| Operation | Automatic | Automatic | Automatic | Push Button or Automatic |
 |
|
|
|